Comments on: Cisco Switch Err-Disable problem

By: Nawaid Ausaf

Nawaid Ausaf — Wed, 20 May 2009 18:16:35 +0000

Aziz,
I tried the above, but I could not telnet into my ce500.
Can you help me out please.
Thanks

-Nawaid

By: Aziz

Aziz — Wed, 26 Mar 2008 10:13:16 +0000

@serg, as usual lah:
!
interface Vlan1
ip address 10.20.1.2 255.255.255.0
no ip route-cache
!
line con 0
line vty 0 4
privilege level 15
login local
line vty 5 15
privilege level 15
login local

By: Serg

Serg — Wed, 19 Mar 2008 12:20:43 +0000

Hi Aziz,
it seems that you’ve enabled the telnet service on a Cisco CE500, which is supposed to be manageable only by a web interface, as of Cisco official documentation. Can you tell us how to do this, please?
Thanks in advance

By: Aziz

Aziz — Wed, 12 Mar 2008 11:13:33 +0000

OK, thanks Phillip…

By: Phillip

Phillip — Mon, 10 Mar 2008 06:34:14 +0000

also check and make sue that you do not have bpduguard enabled on the interfaces.

if you do, use the command of default-interface ( port number)

then go to interface and use the shut then no shut command.